Absorber: NoiseShield® 48F & 848F – Transmission Sound Barrier

NoiseShield® Transmission Sound Barrier - Noise Control Products - Acoustica ProjectsNoiseShield® Transmission Sound Barrier - Noise Control Products - Acoustica Projects

NoiseShield® Transmission Sound Barrier - Noise Control Products - Acoustica Projects

NoiseShield® is a rigid laminate noise barrier which has been specifically engineered for;

  • Machinery enclosures
  • Machinery rooms

Transmission Sound Barrier - Frequency Comparison - Acoustica ProjectsTransmission Sound Barrier - Sound Transmission Loss - Acoustica Projects


Available in sheets of thermally bonded, 100% polyester fibre, semi-rigid laminate sheets, with an aluminium foil facing on one side.


NoiseShield® 48F 1.2m x 1.2m
NoiseShield® 848F 1.2m x 1.2m

NoiseShield® 48F 8mm
NoiseShield® 848F 16mm



Group 1
This product has been tested by the CSIRO and certified that it meets the requirements for low flame spread of a bulkhead, wall and ceiling lining in accordance with IMO Resolution A.653 (16) as amended by resolution MSC 61 (67) as specified by the International Convention for the Safety of Life at Sea, 1974 and the technical requirements of the amended IMO resolution MSC61 (67), Annex2, section 2.2.



  • Low cost and long-lasting
  • Service temperature is -50o to 120oC
  • 10-year guarantee
  • Easy to handle, cut, and install
  • Unaffected by vibration, oil, water, and hydrolysis
  • Environmentally safe
  • Available in two thicknesses
  • Made in Australia



For optimum benefit, NoiseShield® must be properly installed. Where airflow is required, expert advice should be sought from our engineer, as acoustic baffles me be required. Any seal must be airtight for best results.

Pins should be installed starting 200mm max from material edges in a 300x300mm grid pattern.

All edges & joints must be taped with an alloy foil tape, please feel free to ask about ordering the aluminium foil tape we provide.

Fire-resistant glue is recommended.

When cutting to install always leave a 2-3mm margin all around for a tight fit even when cutting from a pattern.


Any questions? Contact us now!